##  ##  
 ####### 
 ####### 
 ## # ## 
 ##   ## 
         

   #     
   #     
 #####   
   #     
   #     
   #  #  
    ##   
         

 _____ 
(  _  )
| (_) |
|  _  |
| | | |
(_) (_)
       
       

   ##    
         
  ###    
   ##    
   ##    
   ##    
  ####   
         

  ______
 |___  /
    / / 
   / /  
  / /__ 
 /_____|
        
        

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
'''Subpage of MembersPage/Akos/AudiAbz''' ---- '''Originally it was falsely reported''' that trigger system is InputTrigger/AudiTrigger with '''primary trigger''' * 136 tooth (none missing) VR sensor on the crank '''secondary trigger''' * 1 tooth "crankhome-VR" sensor on the crank * 1 tooth HALL on the cam, (windowing every other crankhome-VR pulse) ---- '''It turned out''' there is no crankhome-VR, and the '''primary trigger''' * 60-2 VR (appr 960 Ohm) VR sensor on the crank ** '''DID Audi V8 ENGINEs USE 60-2 ? The motronic seemed to run it...''' '''secondary trigger''' * 1 tooth HALL on the cam Unfortunately the ECU was ordered with secondary_trigger=VR that needs VR sectrig to work. Modification so it would work with HALL trigger is possible (see GenBoard/Manual/InputTriggerHardWare), only a solderblob needs to be removed, but disassemble+assemble might take 40 mins. Likely the 8 ignition coils will originally be driven with ign_dualout, so the 60-2 primary trigger is enough to run the engine.
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.