##   ## 
 ## # ## 
 ####### 
 ####### 
  ## ##  
         

  _______ 
 |__   __|
    | |   
    | |   
    | |   
    |_|   
          
          

  __  __ 
 |  \/  |
 | |\/| |
 | |  | |
 |_|  |_|
         

         
 ##      
 ##      
 #####   
 ##  ##  
 ##  ##  
 #####   
         

         
 ######  
## ## ## 
## ## ## 
## ## ## 
## ## ## 
## ## ## 
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
This is the current todo list for MTX tabs, [http://www.vems.hu/files/MegaTunix/gui Files here] ---- *cranking and warmup -- almost done //Emil **primep=19 *** Add everything needed under each setting like this *** offset: 0 *** label: Priming pulse *** tooltip: Time for the injectors to open at powerup *** Scale: setting 0-199 is in 0.1 mS scale, 200-255 is in 1mS **primep_temp_scaling=A3 **cwl=2A **cwh=2F **cranking_thres=05 **awev=0F **awev_temp_scaling=A0 **awc=C8 **Should cranking advance go here too? **warmup_clt_range[0]=00 **warmup_clt_range[1]=14 **warmup_clt_range[2]=0B **warmup_clt_range[3]=3C **warmup_clt_range[4]=50 **warmup_clt_range[5]=64 **warmup_clt_range[6]=78 **warmup_clt_range[7]=8C **warmup_clt_range[8]=AA **warmup_clt_range[9]=C8 **warmup_clt[0]=A0 **warmup_clt[1]=91 **warmup_clt[2]=8C **warmup_clt[3]=8C **warmup_clt[4]=89 **warmup_clt[5]=87 **warmup_clt[6]=82 **warmup_clt[7]=82 **warmup_clt[8]=78 **warmup_clt[9]=64 **warmup_rpm[0]=64 **warmup_rpm[1]=64 **warmup_rpm[2]=64 **warmup_rpm[3]=64 **warmup_rpm[4]=64 **warmup_rpm[5]=64 **warmup_rpm[6]=64 **warmup_rpm[7]=64 *Basic settings **req_fuel=1E **divider=01 **injopen=28 **battfac=28 **alternate=01 **kpafac=7D **kpaofs=72 **injocfuel=2A **injrampup_battfac=FF **injpwm=64 **injpwmt=FF **injpwm6=18 **inj_stage2_rate=FF **inj_stage2_start_tps=FF **inj_stage2_start_map=FF **rpmk[0]=0B **rpmk[1]=B8 **tpsdot_kpadot_conf=00 **tpsdotrate[0]=03 **tpsdotrate[1]=0A **tpsdotrate[2]=14 **tpsdotrate[3]=26 **tpsaq[0]=0A **tpsaq[1]=0A **tpsaq[2]=0A **tpsaq[3]=0A **tps_thresh=08 **tpsasync=02 **acmult=64 **tpsacold=02 **tpsdq=00 **decel_fuelcut_thres=0F **overrun_fuelcut=11 **overrun_fuelresume=10 **rev_limit=3C **airden_ignore=62 **config11=31 **config12=30 **config13=0A **batt_cal=BD **fastidle=10 **baro=64 **dbaro=0C **tps_low=2E **tps_high=C7 *IAC Config Tab **iac_step_seq=D8 **iac_conf=08 **iac_max_steps=D2 **iac_tps_thres=01 **iac_cold_idle_temp=BF **iac_warm_idle_temp=C7 **iac_cold_rpm=78 **iac_warm_rpm=6F **iac_cold_start_pos=7B **iac_warm_start_pos=75 **iac_afterstart_rpm=08 **iac_afterstart_duration=60 **iac_afterstart_steps=40 **iac_kp=20 **iac_ki=16 **iac_kd=10 **iac_integral_speed=18 **iac_integral_limit_dec=10 **iac_integral_limit_inc=25 **iac_integral_deadband=15 **iac_deadband=23 **iac_pid_conf=05 **iac_overclose_interval=01 **iac_ref_pos[0]=BA **iac_ref_pos[1]=B4 **iac_ref_pos[2]=A6 **iac_ref_pos[3]=A1 **iac_ref_pos[4]=9B **iac_ref_pos[5]=94 **iac_ref_pos[6]=8C **iac_ref_pos[7]=85 **iac_ref_pos[8]=82 **iac_ref_pos[9]=80 **iac_sol_channel=FF **iac_ign_advance_change=50 **iac_ign_retard_change=50 **iac_ign_advance_limit=21 **iac_ign_retard_limit=16 **iac_ign_threshold=08 * EGO and WBO2 Tab **ego_conf=07 **ego_lag=15 **ego_coolant=93 **ego_maxtps=80 **ego_maxmap=64 **ego_minrpm=07 **ego_maxrpm=FF **ego_warmup=3C **ego_lean_limit=29 **ego_rich_limit=32 **ego_pid_kp=60 **mt_unused=FF **ego_delta=02 **ego_target=18 **ego_pid_window=00 **wbo2_warmup_ramp=B5 **wbo2_warmup_target=FF **wbo2_abs_limit=E4 **wbo2_limit_maxt=A0 **wbo2_fallback=60 **wbo2_retry_t=06 **wbo2_edgetime_corr=BA **wbo2_edgetime_min=50 **wbo2_ri_target=96 **wbo2_nernstdc_target=8D **wbo2_pump_pw_zero=64 **wbo2_calibration=92 **wbo2_heater_pid_kp=46 **wbo2_heater_pid_ki=10 **wbo2_heater_pid_kd=1A **wbo2_heater_pid_ilimit=80 **wbo2_pump_pid_kp=40 **wbo2_pump_pid_ki=2E **wbo2_pump_pid_kd=08 **wbo2_pump_pid_ilimit=84 **wbo2_ri_confidence_scale=80 *Knock Tab **knock_conf=01 **knock_sampling_window=F2 **knock1_frequency=27 **knock1_gain=0E **knock1_integrator=14 **knock2_frequency=29 **knock2_gain=00 **knock2_integrator=00 **knock_threshold=00 **knock_noise_scale=D8 **knock_max_retard=00 **knock_default_retard=00 **knock_retard_step=28 **knock_retard_delay=50 **knock_advance_step=FF **knock_advance_delay=E0 **knock_minrpm=14 **knock_maxrpm=42 * VE Learning Tab **ve_learn_coolant=D8 **ve_learn_max_power=FF **ve_learn_rpm_scale=28 **ve_learn_kpa_scale=28 **ve_learn_ego_scale=50 **ve_learn_min_weight=30 **ve_learn_speed=36 **ve_learn_limit=FF **ve_learn_conf=00 * LCD Tab **lcd_c0=F6 **lcd_delay=1B **lcd_backlight=70 **lcd_offs[0]=FF **lcd_offs[1]=FF **lcd_offs[2]=FF **lcd_offs[3]=FF **lcd_default_view=00 *Trigger Settings **primary_trigger=FF *** primary_trigger_edge_label **** primary_trigger_edge_rising **** primary_trigger_edge_falling *** primary_trigger_wheel_label ****primary_trigger_wheel_coil ****primary_trigger_wheel_multi *** primary_trigger_filtering_label ****primary_trigger_filtering_enabled ****primary_trigger_filtering_disabled **secondary_trigger=FF *** secondary_trigger_enabled_label **** secondary_trigger_enabled **** secondary_trigger_disabled *** secondary_trigger_edge_label **** secondary_trigger_edge_rising **** secondary_trigger_edge_falling *** secondary_trigger_filtering_label **** secondary_trigger_filtering_enabled **** secondary_trigger_filtering_disabled *** secondary_trigger_enabled_label **** secondary_trigger_enabled **** secondary_trigger_disabled **tooth_wheel=00 **trigger_tooth=00 **another_trigger_tooth=00 **crank_minper=50 **tooth_wheel_twidth1=1E **tooth_wheel_twidth2=1E **cam_sync_r_edge_phase=03 **cam_sync_f_edge_phase=02 **reset_engphase_after=04 **ign_tdcdelay=96 *Ignition Tab **ign_dwell14=2E **ign_dwell6=45 **ign_crank_advance=20 *** Should this be in Cranking Tab? Or both ? **ign_out=70 **ignchmax=01 * Turbo specific settings **als_lowrpm=FF **als_maxtps=FF **als_ignretard=00 **als_rich=00 **boost_conf=0E **boost_targetoffs=07 **boost_minpressure=7F **boost_pid_kp=09 **boost_pid_ki=7F **boost_pid_kd=09 **boost_pid_ilimit=7F **boost_channel=FF * Configurable outputs **misc1out_minrpm=FF **misc1out_maxrpm=FF **misc1out_mintps=FF **misc1out_maxtps=FF **misc1out_minmap=FF **misc1out_maxmap=FF **misc1out_channel=FF **misc2out_minrpm=FF **misc2out_maxrpm=FF **misc2out_mintps=FF **misc2out_maxtps=FF **misc2out_minmap=FF **misc2out_maxmap=FF **misc2out_channel=FF **act_wot_rpm=FF **act_wot_channel=FF **act_rpm_rpm=19 **act_rpm_channel=FF Fuelpump settings, where does this fit? **engine_off_delay=04 **pump_on_mintime=0F **fuelpump_channel=57 **fan_temp=D5 **fan_hyst=05 **fan_channel=07 **water_pump_temp=7F **water_pump_hyst=0A **water_pump_channel=FF **egt1_cal=0F **egt1_offs=7F Dont forget this new settings. *hybrid_rpm_a=20 *hybrid_rpm_m=30
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.