### ### ## ## ## ## ## ## ## ## ### ##
_______ ( ____ \ | ( \/ | | | | | | | (____/\ (_______/
_ _ | | | | | | | | | | | | \ \_/ / \___/
___ ( _`\ | (_) ) | _ <' | (_) ) (____/'
## ## ## # ## ####### ####### ## ##
IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now. Visit Preferences to set your user name Summary of change: Here you can report issues with your Genboard V3, firmware, tuningprogram or hardware problems. If you dont know, put it under Unknown. Firmware: Hardware: *2005-08-10 - Possible fried injector driver ** on Werners volvo 140, with 2.5 ohm injectors with PWM activated, 40% 1.5 ms pwmt ** After a wiring problem (ground or flyback) and upgraded MAP - sensor, we got strange lean misfires at higher load/pulsewidths, these problems was moved up in boost level with a raised injpwmt, but does not fix the problem (tried as high as 15mS for a short moment, to never get into PWM mode..). We have probably fried something, should i start measuring somewhere? Or change all FET-drivers and FET's that are involved ? Tuningprogram (Megatune): *2005-06-23 ** Alha-n tuning is not working ? Megatune ->useing MAP not TPS load the VE-Tables. ** Ini file -> vemsv3_v13_r021.zip ** firmware -> 1.0.13 rc3 ** possible solutions: *** Developers are working on making firmware report load instead of the current kpa *** If you are running alpha-n only and not hybrid mode, its possible to modify vemsv3.ini to show TPS in the realtime tuning, write here or memberspage if you need help. ** thanks for the info.I'am useing Alpha-n only, yes I need details how to modify vemsv3.ini Unknown: *2005-06-22 EmilLarsson ** Firmware -> v13rc5, precompiled. ** config + tables http://kombi.ulkhyvlers.net/vems/roland/ **LCD Display works with genboard powered, engine not started, but after the engine is started, it stops working, sometimes blank, sometimes full of rubbish ** possible solution: *** Will try a capacitor between VCC and GND on the display-side Optional: Add document to category: Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.