# # ##### # # # # ##
### ## ## ##### ## ## ## ## ######
_ _ | | | | | |_| | | _ | |_| |_|
_______ ( ___ ) | ( ) | | | | | | | | | | | /\| | | (_\ \ | (____\/_)
_____ ( _ ) | ( ) | | | | | | (('\| (___\_)
IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now. Visit Preferences to set your user name Summary of change: '''Add issues/bugs to most recent release at the top''' Do not forget to mention : * VemsTune version * V3 firmware version. * Zip and publish your saved config (vemscfg) and Tools/firmware/config download when appropriate. '''Known issues''' * On V3 ECU newer than 2011 03 01 do not use coolant and air patch files with VemsTune older than 2011 03 23 * Documentation needs to be added * CPU consumption and eye candy ** Graphics performance of gauges, multi graph, and all eye candy are dependant on certain combinations of hardware video drivers and wxWidgets. ** ATI graphics chipsets are known to have unreliable 2D grahpics acceleration. ---- '''Old firmware trouble''' Tried this on VT 06-04. If connecting to an old ECU which lacks an ini-file, then you should at least be given the option of downloading config and upgrading firmware. It was not able to connect to 1.0.71 to even enable any kind of upgrade path with VemsTune. Here is a video of the problem : [http://www.savarturbo.se/~mattias/motor/vems_data/vemstune-dev/vt-old-firmware-trouble.mov 27 MB download] I used the old bat-scripts of 1.0.73 from MegaTune packages to upgrade to 1.0.73 and then up to recent firmware with VemsTune. ---- '''Config different with 05-27 vs 06-04''' I tuned a car with 05-27 for someone with firmware 1.1.92, one week later he downloads 06-04 on his new laptop and connects and saves the config file at once. A validate config reports bad anytrim settings which were good before. The config saved with 06-04 also misses the t, b, p, e and b tables. The config files are here : [http://www.vems.hu/files/MembersPage/MattiasSandgren/vemstune/vt-05-27.vemscfg 05-27] and [http://www.vems.hu/files/MembersPage/MattiasSandgren/vemstune/vt-06-04.vemscfg 06-04] Can't really explain any of it, and I'm not there to oversee it. [Mattias] ---- '''2011-06-09 NIGHTLY compile''' - grave: h[] table is saved wrong to [http://vems.hu/files/MembersPage/MarcellGal/Audi/etc/badconfig/v3.3_n002004-A-2011.06.09-16.28BAD_h0.vemscfg vemscfg]! <PRE> h[8]=01 02 04 08 10 20 40 80 h[8]=00 48 36 24 12 00 00 00 h[8]=68 40 38 48 58 20 20 20 h[8]=00 00 00 08 0C 00 00 00 h[8]=80 80 80 80 80 80 80 80 h[8]=00 00 00 00 00 00 00 00 </PRE> b table also needs attention. ---- '''VT 2011-06-04''' flags fake warning For the Audi trigger divide by 3 setup (default VemsTune/QuickStartAudi ) show a warning on validate. * also displays an error for the greyed out secondary trigger=25 raw value * '''It seems to show warning when rising edge''' and no warning when falling edge. ** It should not show warning because of rising edge. [Jamo] ** Please use the VemsTune Error report system (VemsTune: Help menu/Error reporting), and send us your config. ---- In vemstune/config/include page-config-[version].ini change sdcard_choice sdcard_choice = bits, U08, 149, [0:7] , "INVALID", "INVALID", "INVALID" In to sdcard_choice = bits, U08, 149, [0:7], "Disabled", "Enabled" I don't know if its good but it works getting your knock working again in channel 0. ---- '''VemsTune 2011-05-27''' (report by Mattias) * Overall : All windows with any kind of text in them are not possible to mark and copy text. This is very useful if you want to describe a problem or just cut and paste some information to anyone. ** F1 for help dialogs ** Verify config window * When making offline changes to a config, like changing values of a VE table, then pressing the remap button erases all changes you made. Very, very irritating. *In "injector settings" dialog: ** Strategy is not spelled startegy. Traditional is not spelled Tradicional. * In "PWM Idle control", make drop down for frequency wide enough ** only displays "00." ** should read "100.00" * Boost rpm bins should have reasonable defaults: 1000 rpm, 2000, 3000, etc. * In all 2D tables, when using remap function it should be possible to change the upper and lower most bins to more extreme values. Extrapolate from previous extremes? '''Upgrade scenario''' Done on a workstation with real serial port (COM1) running Windows XP (32 bit). 1. Install 2011-05-27 2. Start application 3. Enable comms, pick COM1, detection works straight away, ECU comes online and uses firmware 1.1.70 [http://www.vems.hu/files/MembersPage/MattiasSandgren/vemstune/test-case-config-1.1.70.vemscfg config here]. 4. Firmware validation complains about : * "Hall-dirac filtering" which doesn't even exist in this firmware. * iac_speed_step has INVALID value (40) ** [http://www.vems.hu/files/MembersPage/MattiasSandgren/vemstune/1.1.70-validate-stepper-issue.png screenshot of validate config window] ** First you must enable stepper idle control to even access this setting ** Settings iac_speed_step to 61 (lowest value you can select in dialog) ** Disable stepper control. Now frequency changed for PWM valve. Change back to 50 Hz (common with Bosch valves) and you are back at square one. 5. Now upload new firmware 1.1.92. Some observations. * The "VEMS Message" window for flash upload and verify progress stay on top of ALL windows, should only stay on top of VemsTune main window. This might be happening with other windows too. Not a high priority to fix, only annoying if you work with other applications at the same time. * The "config upload" window that asks if you want to load default config makes it impossible/difficult to use Alt-Tab back and forth to VemsTune which always stays in the back and only comes forward if you click on the application window. 6. When the new config is uploaded to the ECU, the application hangs. * [http://www.vems.hu/files/MembersPage/MattiasSandgren/vemstune/1.1.92-config-upload-hangs.png vemstune hangs] Second attempt. Ok. Restart VemsTune, now running 1.1.92 firmware after failed config upload, use the upload advanced (to A and B) function in the file menu, picking the latest 1.1.70 config file, conversion and upload goes well this time. Still, validate config fails on these points : * [http://www.vems.hu/files/MembersPage/MattiasSandgren/vemstune/1.1.92-invalid-settings.png screenshot of validate config window] * Secondary trigger Hall dirac filtering is not even in the old 1.1.70 firmware, and the default is "enabled" with 1.1.92 ? Set that do disable. * Also enabled is "LS1 forgiving", this should also be disabled by default. * Misc 1 and 2 output condition sensors have INVALID values, set these to Disabled in the default config. * Boost alternate settings use an INVALID control frequency, set this to lowest valid frequency. * Does not complain (like 1.1.70 and other firmwares) about stepper iac_speed_step, good. '''Detection issue''' Hard to understand exactly what happens. I did this on my Lenovo T61 laptop using a fresh install of 05-27. * Tested on WinXP, laptop has bluetooth COM port besides USB serial port adapter. * Go to dialog : Preferences -> ECU communication and enable communication. Press detect. Press close while detection is going on hangs the application indefinately but does not consume any CPU during that time. * The entire dialog is greyed out during detection, at least the part where the progress for detection is happening should not be greyed out (where it says which COM port it's trying). The close button is not greyed out, but pressing it hangs the application (described just above). * The detection process should be interruptible, and at least display what it's trying to do or waiting for. * In one test, with remote control through TeamViewer I started a freshly installed 05-27 VemsTune, after enabling comms and picking the COM port for the FTDI adapter (COM4) it brought up a "ECU detection" window with small progress bar, and just hung there (waited 5 mins) and could not close or interrupt the process (kill through task manager). Starting VemsTune again started the detection at once, and hung there waiting for detection (of something) indefinately (5+ minutes, as long as I had patience to wait). '''Graphics issue''' Still in 05-27, due to slow graphics on some laptops - it's a known problem but still worthwhile to bring up a scenario. Bringing up a simple table, like "warmup enrichment table" or "idle reference duty cycle", can bring graphics display to a complete halt in the active gauge group in the background. This needs to be fixed, wxWidgets must have some means of drawing all elements of the application without being interrupted, before continuing to make the next redraw. It seems only a few elements are redrawn, then interrupted by some kind of timer (too short time) and the redraw starts over, which leaves some elements never seing an update (most gauges). ---- INVESTIGATING: 2011-05-27 sometimes crashes before (or after) firmware upgrade (in same usecase, 2011-04-26 worked well) * upgrading from ... firmware ? * upgrading to ... firmware ? ** AIR=, CLT= * v3 serialnr= ? (purchased after 2011-03-01 ?) * at what step (exactly) does it crash ? ** when the box is stuck in bootloader mode, does VT crash repeatedly immediately after VT is instructed by the user to "stay" ? ** any message or pointer that could be useful ? DONE: '''Issureport ergonomy improved after 2011-04-26, more userfriendly in 2011-05-27''' '''VemsTune 2011-01-20''' * When changing from Celcius to imperial measurements in File->Firmware parameters, digital gauges do not change unit description. * Gauges move down by 73.3px and to the left by 1.3px on Main overview each time display is changed from group to group. Gauges shrink in size by 1px in horizontal and vertical directions each time as well. Example: view Main overview group, press Shift+8, press Shift+1. Repeat to watch gauges migrate down the page. Same thing happens if Main overview tab is closed and reopened. ** How do you mean "73.3px", and "1.3px"? You can move and resize every windowed items only by whole integer value. * If all gauges are removed in gauge edit mode, then a gauge file is imported, gauges are added twice and in different positions. ---- '''Fixed items''' May not appear until next release. Optional: Add document to category: Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.