_   _ 
| | | |
| |_| |
|  _  |
| | | |
\_| |_/
       
       

 __      __
 \ \    / /
  \ \  / / 
   \ \/ /  
    \  /   
     \/    
           
           

  _______ 
 |__   __|
    | |   
    | |   
    | |   
    |_|   
          
          

 _____ 
|  ___|
| |__  
|  __| 
| |___ 
\____/ 
       
       

 _   _ 
( ) ( )
| |/'/'
| , <  
| |\`\ 
(_) (_)
       
       

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
'''Honda K20X is fully supported''', trigger specs as follows: * Trigger settings for, 12+1extrapulse crank 4+extrapulse on cam 4cyl Honda K20A engine camsync * Primary trigger HALL * Secondary trigger HALL: Exhaust(4+1) needed for cam sync * 3d trigger HALL: intake(4pulses), needed for campos for intake cam * the 4 active coils work with logiclevel output 0/5V with standard 255 Ohm (or even with 510 ohm) series resistors. Triggerlog picture of test on bench confirming good sync-up and spark: http://vems.hu/download/sensors/triggerwheels/honda/honda_k20a_extrapulse_fast.png Configlets for this engine are available in '''VT -> primary trigger -> "4cyl_12+extra_Honda_K20AX_Camsync"''' With the information above the setup and installation should be quite straightforward. Spark positions in above triggerlogs might not match real engine (strobe and adjust to correct triggertooth and tdc_delay, when exact info available please take a note here with exact engine code). ---- '''F20C 2005 and up''' is same trigger wheel as k20X but different sensor type is used: * Primary trigger VR * Secondary trigger HALL: Exhaust(4+1) needed for cam sync Configlets for this engine are available in '''VT -> primary trigger -> "4cyl_12+extra_Honda_F20C_05_up_Camsync"''' ---- '''All these engines work''' (known good, triggers benchtested way above practical max RPM, >14000 RPM) * see InputTrigger/HondaFTwentyTrigger for '''F20c 2000 to 2005''', which is different trigger (12 tooth on crank no extra/missing + 3 cam pulse required for sync all VR crank / cam)
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.