##  ##  
 ##  ##  
 ##  ##  
  ####   
   ##    
         

         
         
 #     # 
 #  #  # 
 #  #  # 
 #  #  # 
  ## ##  
         

         
         
  #####  
 ##  ##  
 ##  ##  
  #####  
     ##  
     ##  

  ____  
 / ___| 
 \___ \ 
  ___) |
 |____/ 
        

         
         
 ######  
     #   
   ##    
  #      
 ######  
         

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
My own street car. It works with VEMS since 2018. --------------- *VEMS 3.8b (diy kit) **firmware: 1.2.38 **hc-06 bluetooth (diy) **7 inch screen built in 1 din car audio --------- *Engine: 2.2 MC stock bottom end **Cylinder head: OEM with ARP Head Studs, FCP springs, Inconel valves **Intake: Custom dual plenum intake (like 200 trans am) **Exhaust: Custom header, 2,75 inch pipes, 1 muffler **Camshaft: custom 272 lobe; **Ignition: Audi TFSI COP **Primary trigger: 60-2 VR(volvo 2 wire sensor) custom trigger **Secondary trigger: OEM distributor with 1 teeth ------------ Pinout: *TPS GND black SIGNAL pink/white 5v+ ref pink *CAM GND black SIGNAL pink/white 5v+ ref light red *CLT GND blue SIGNAL blue/black *MAT GND brown SIGNAL blue/yellow *IDLE 12v+ red SIGNAL white *CRANK 5v+ ref grey/red SIGNAL grey sensor GND black/white *INJ1 12v+ yellow SIGNAL yellow/grey *INJ2 12v+ yellow SIGNAL yellow/brown *INJ3 12v+ yellow SIGNAL yellow/purple *INJ4 12v+ yellow SIGNAL yellow/red *INJ5 12v+ yellow SIGNAL yellow/white *COIL1 12v+ red sensor gnd black SIGNAL green/black gnd yellow *COIL2 12v+ red sensor gnd black SIGNAL green/white gnd yellow *COIL3 12v+ red sensor gnd black SIGNAL green/red gnd yellow *COIL4 12v+ red sensor gnd black SIGNAL green/yellow gnd yellow *COIL5 12v+ red sensor gnd black SIGNAL green/brown gnd yellow *O2 4.9 ec18 pin9 red ec18 pin7 yellow ec18 pin13 black ec18 pin18 white 15+ fused grey *check/warning light output ec18 pin4 white (gnd) *launch control input ec18 pin2 analog ch5 black(gnd) MAIN RELAY FUEL PUMP RELAY ---------------- http://www.vems.hu/files/tbiro/audi%2010vt/20180614_105753.jpg http://www.vems.hu/files/tbiro/audi%2010vt/20180530_1907402.jpg http://www.vems.hu/files/tbiro/audi%2010vt/20200119_165110.jpg http://www.vems.hu/files/tbiro/audi%2010vt/20191228_150211.jpg http://www.vems.hu/files/tbiro/audi%2010vt/20191025_172527.jpg http://www.vems.hu/files/tbiro/audi%2010vt/61901972_404811100248987_5742960978056708096_n.jpg ---------------- Videos https://www.youtube.com/watch?v=vlayfmzy22A https://www.youtube.com/watch?v=uNPUSLbH7FM ------------------ The car runs great. Boost pressure is now 1.6 bar. Great power-band 3500-7000 rpm. My goal is build one of the most powerful 10vt audi In hungary.
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.