Subpage of Outputs menu

• Wide Open Throttle Actuator
  • This activates an output above a chosen Activation RPM +100 RPM limit and only when
  • there is a WOT condition (above 90% TPS).
  • Example: Activation: 2000 RPM : activates at 2100 RPM
• RPM Actuator
  • The RPM actuator has +-100 RPM hysteresis, configuring to 500 RPM -> activates at 600 RPM, deactivates at 400 RPM
  • From firmware 1.1.86 the 0 RPM and 100 RPM configuration has different result
  • 0 RPM : activates when engine states flag shows "Running On" or "cranking", deactivates if flag shows "Running Off".
    • Warning this flag can change very fast many times, use only for leds, or lamps
  • 100 RPM : activates at 200 RPM, deactivates at 100 RPM