# Trigger settings for Crysler Viper V10 10 pulse crank, 1 pulse cam.
# 90 deg Odd-Fire v10 (needs 18 deg spark delay).
# Firing order: 1-10-9-4-3-6-5-8-7-2
# all trigger sensors HALL
# uses 5 dumb wasted spark coils 
# compatible with firmware 1.2.33 and up
#
# currently the odd-cylinder numbers are delayed 18deg, if even-delay is needed uncomment the relevant line below.
# tdc delay and spark delay order need to be verified on engine with strobe.
primary_trigger=A2
secondary_trigger=58
tooth_wheel=0A
trigger_tooth=00
another_trigger_tooth=01
tooth_wheel_twidth[0]=01
tooth_wheel_twidth[1]=20
crank_minper=00
ign_tdcdelay=78
toothrel_normal=34
toothrel_missing=F0
ignchmax=04
h[1]=00 09 08 07 06 05 04 03
# delay the odd-cylinders by 18 deg.
h[3]=00 48 00 48 00 48 00 48
# delay the even-cylinders by 18 deg.
# h[3]=48 00 48 00 48 00 48 00
max_prim_per_sec_count=FF
strig_validation=00
secignore=01
config11=90