# Trigger settings for, missing tooth 60-2 primary, 8-1 secondary and 6 pulse third trigger for 6 cyl BMW s54 engine double vanos with full camsync
# Primary trigger VR 
# Secondary trigger HALL: Exhaust camshaft (8-1 pulses) needed for cam sync
# 3th trigger HALL: Intake camshaft (6 pulses), needed for campos for intake cam
# Coils are dumb coils, need internal IGBT in v3.
# Dual VANOS needs 4 PFETS v3 inside to control it.
# Firing order: 153624
#
# verified with 1.2.28 firmware on v3 controlled stock s54 engine using stock triggers and full vanos control on both axis.
#
primary_trigger=01
secondary_trigger=18
tooth_wheel=3A
trigger_tooth=04
another_trigger_tooth=14
ignchmax=05
alternate=05
tooth_wheel_twidth[0]=00
tooth_wheel_twidth[1]=18
ign_tdcdelay=78
config11=50
secignore=10
max_prim_per_sec_count=19
vvti_measure_tooth=07
# Camshaft control : 125 Hz, Dual (Vanos), Third trig enable FALLING edge, Hall diract filter disabled
vvti_cold=3C
# 2.8 degree PWM range
vvti_idle=5D
strig_validation=00
h[1]=00 64 50 3C 28 14 00 00