# Trigger settings for, 12+1extrapulse crank 4+extrapulse on cam 4cyl Honda K20A engine without camsync
# Primary trigger HALL 
# Secondary trigger HALL: Exhaust(4+1) needed for cam sync
# 3th trigger HALL: intake(4pulses), needed for campos for intake cam
# Coils work with logiclevel output 0/5V with stock 510ohm series resistors.
trigger_tooth=00
another_trigger_tooth=06
tooth_wheel=0C
primary_trigger=0A
secondary_trigger=02
ignchmax=03
alternate=03
tooth_wheel_twidth[0]=00
tooth_wheel_twidth[1]=78
toothrel_normal=FF
h[1]=00 06 00 06 00 00 00 00
config11=30
strig_validation=08
secignore=FF
max_prim_per_sec_count=2