# Reduction temperature control from analog 2 input
# Used with Egt amplifier (240C/V converter)
# 650C-> 2,71V
# 700C-> 2,91V
#	analog target(named boost target) = 120
#	pid kp= 14 
#	input_val = 150 -> DC= 5.1%
#	input_val = 90  -> DC= 15.7%
#Curve must set 2.71->150 -> bins have to set 2,813 : 120 ; 2,500: 208
#Curve must set 2.91->90  -> bins have to set 2,813 : 120 ; 3,125: 31

pwm0=00
pwm4=00
analin2_curve[0]=D0
analin2_curve[1]=D0
analin2_curve[2]=D0
analin2_curve[3]=D0
analin2_curve[4]=D0
analin2_curve[5]=D0
analin2_curve[6]=D0
analin2_curve[7]=D0
analin2_curve[8]=D0
analin2_curve[9]=78
analin2_curve[A]=1F
analin2_curve[B]=1F
analin2_curve[C]=1F
analin2_curve[D]=1F
analin2_curve[E]=1F
analin2_curve[F]=1F
analin2_curve[G]=1F
analin2_cal=20
analin2_offset=00
analin2_mode=03
analin_limiter=3F
pwm_out4_control_kp=0D
pwm_out4_control_ki=00
pwm_out4_control_kd=00
pwm_out4_control_ilimit=00
pwm_out4_control_mode=F5
pwm_out4_control_fixrefdc=19
pwm_out4_control_fixtarget=3C
pwm_out4_control_mindc=00
pwm_out4_control_maxdc=FF